Dik Geurts Ivar 10 H2O Installationsvorschrift Seite 23

IN S TA LLA TION M A N U A L
Contents
1. Introduction
2. Declaration of conformity
3. Safety
3.1 General
3.2 Regulations
3.3 Precautions/safety instructions during installation
3.4 Safety instructions H2O
3.4.1 Thermal safety valve
3.4.2 Operation of the thermal safety valve.
3.4.3 Pressure relief valve
3.4.4 De-aeration
3.4.5 Boiling-dry safeguard
4. Unpacking
5. Installation
5.1 Preparations of the installation
5.1.1 Regulations
5.1.2 Flue duct
5.1.3 Country-specific installation requirements
5.1.4 Exempt appliances
5.1.5 Outside air connection
5.2 HETAS amendments
5.2.1 The Clean Air Act 1993 and Smoke Control Areas
5.2.1.1 Smoke Control Areas
5.2.1.2 Additional Operational Information
5.2.1.3 Exempt appliances
5.3 Provisions for the benefit of the central heating system
5.4 Installing the fire, general
5.5 Return temperature monitoring in the burner chamber.
5.6 Completing installation
6. Delivery
7. Maintenance
8. Malfunctions
9. Appliance-specific information
9.1 Smoke control area United Kingdom
9.2 Air slide valve and flue gas exhaust
9.2.1 Air slide valve
9.2.2 Flue gas exhaust
9.3 Interior lining
9.3.1 Vermiculite
9.3.2 Flame baffle plate
9.4 Adjusting the door / Replacing door seal
9.5 Supplementary installation instructions per appliance
9.5.1 Ivar 10 H2O
9.5.1.1 Outside air connection
9.5.1.2 Assembly/disassembly of glass panes in door
9.5.1.3 Replacing door seal
Appendix 1: Lieferumfang
Appendix 2: Technical information
23 EN