VOLTCRAFT WB-100 Bedienungsanleitung Seite 29

• Do not switch the meter on immediately after it was taken from a cold to a
warm environment. The condensation that forms might destroy your device.
Let the device reach room temperature before switching it on.
• When measuring highly reflective surfaces, observe that these may be hot-
ter than indicated in the measurement.
• Do not leave packaging material unattended. It may become a dangerous
toy for children.
• If there are any questions that are not answered in this operating manual,
contact our technical support or another expert.
• Also observe the safety information in each chapter of these instructions.
• The mains unit is constructed pursuant to protection class II.
• The mains socket for the mains unit must be close to the device and easily
accessible.
• The mains unit is only suitable for dry, closed rooms. Do not expose it to
direct sunlight, heat, cold, dampness or wetness; otherwise, it will be dam-
aged.
• Moreover, there is a risk of a fatal electric shock!
• Do not pull the mains unit from the mains socket by pulling the cable.
• If the mains unit is damaged, do not touch it. Danger to life from electric
shock!
• First deactivate all sides of the mains socket to which the mains unit is con-
nected (e.g. switch off the respective fuse or turn out the fuse. Then deacti-
vate the associated FI protection switch). Only then pull the mains unit from
the mains socket and take the product to a specialist workshop.
28