Cleaning Of The Sensor Buttons - Pkm KF4-2KB X KH Bedienungsanleitung

S
TRATEGY
O
VERCOOKED OR MELTED FOOD AND STAINS CAUSED BY HEATED SUGAR
❖ Remove
such a
immediately with a suitable glass
ceramic scraper. Beware of cooking
zones which are still hot!
1. Disconnect the appliance from the
mains (fuse-box).
2. Hold the scraper in a 30
scrape off the contamination to a
cold area.
3. Clean the contaminated area with a
dish towel / kitchen paper.
4. Proceed as described in steps 2 - 4 in
the previous section.

7.2 Cleaning of the sensor buttons

❖ Contamination / soiling of the sensor buttons: the appliance may beep and
switch off automatically. The sensors may not work properly when they are wet.
Dry the control panel carefully before you put it into operation again.
1. Disconnect the appliance from the mains (fuse-box).
2. Wipe the sensors with a damp sponge or cloth.
3. Dry the sensors with kitchen paper.
4. Connect the appliance to the mains again.
NOTICE! Dry the control panel carefully and thoroughly before you put it
into operation again.
K
IND OF CONTAMINATION
CONTAINING FOOD ON THE GLASS CERAMIC
contamination
-angle and
0
SAFETY GUIDELINES
➢ Remove such contaminations as
soon as possible. When they cool
down on the glass ceramic, they are
difficult to remove and may damage
the glass ceramic permanently.
➢ Be very careful when using the
scraper so that you do not cut
yourself (especially, when you have
removed the safety cover).
~ ~
76
-
.