Operation With Battery Back Up Time - MGE UPS Systems Pulsar ESV 8+ Bedienungsanleitung

operation with battery back up time

no utility power
power failure
0 mn
1c
to 1f indicating the
remaining autonomy
time: here, between
50 and 75%
1g
flashing
1 beep every 10 s
your protected devices are
supported by the battery
return of utility power
At whatever point the utility power
returns, Pulsar switches to normal
operation:
1a to 1d indicating the battery
recharge percentage: here,
between 0 and 25%
1g on
silence
your protected devices are supported
by the utility power
MGE UPS SYSTEMS
low battery warning
x mn
1a 1e
to off
1f
on
1g
flashing
1 beep every 3 s
you have less than 20%
autonomy remaining: power
down your load, Pulsar will
soon switch off automatically
NB:
Button 2 is to deactivate or activate the
audio warning device when operating on
battery.
Pulsar ESV+: 51032616XT/AC
Pulsar switches off
automatically
ε
x + mn
1a 1g
to off
silence
UPS output off
load charge percentage
if Pulsar is operating off
load: device switches off (*)
5 mn
1a 1g
to off
silence
UPS output off
(*)
configuration via ESV Driver,
not activated by default
If utility power is present, press
button 2 :
1c to 1f indicating the load charge
percentage: here, between
25 and 50%
1g on
silence
31