Description - Waeco mobitronic MBC-2000A/S Bedienungsanleitung

MBC-2000.book Seite 22 Mittwoch, 30. Juni 2004 5:19 17

Description

4
4.1
The battery charger charges 12-V or 24-V vehicle batteries. It automatically
detects a full battery and switches to idle mode. This prevents batteries from
being overcharged.
The device is protected against incorrect polarity. An LED illuminates when
you connect the battery clamps to the wrong poles.
The device also has a jump-start function that can be used to assist in start-
ing the engines of vehicles with dead batteries.
4.2
The battery charger has the following indicators:
22
Downloaded from www.Manualslib.com
Description
Function
Indicators
Ammeter (Fig. 8 E, Page 3):
When charging, the ammeter indicates the actual charging current. When
jump-starting, the indicator points to "Start".
Green "Full" LED (Fig. 8 F, Page 3):
This LED is integrated in the ammeter and illuminates when the battery is
completely charged. This is the case when the final charge voltage has
been reached.
Red "Reverse" LED (Fig. 8 D, Page 3):
This LED is integrated in the ammeter and illuminates when you connect
the battery clamps to the incorrect poles.
In that case, correct the connections.
manuals search engine
battery charger