Hendi 222157 Gebrauchsanweisung Seite 7

Operation
Assembly / Dis- A). To assembly: Main unit (10) and the blending part (7).Turns the main unit
assembly of the
blending part (7) B). To disassembly: Main unit (10) and the blending part (7). Turns the main
with the main
unit with motor
(10)
• Once connected to the power plug, "3" will be
shown on the LCD display (4).
• Lower the blending part (7) into the food con-
tainer (not supplied). Fully submerge blade
(8) into the ingredients before starting the
appliance.
ATTENTION: You should not submerge the
blending part (7) above the Max. mark.
• Hold the main unit (10) firmly with one hand
and the mixing container with the other hand.
• Press and hold the ON / OFF button (1), the
appliance then starts blending continuously.
• Use a gentle up-and-down motion to blend
the food ingredients smoothly.
• To avoid food spattering, do not lift the appli-
ance out of the ingredients during operation.
• Select the blade speed by pressing the + (2)
or - (3) button (Speed range: 1 to 6) during
operation. The blade speed will be shown on
the LCD display (4).
(10) anti-clockwise unit it is fully fixed with the blending part (7).
unit (10) clockwise for disassembly.
Next, connect the power plug to a suitable electrical outlet.
Note: No need to press the ON/OFF button (1)
when selecting the blade speed simultaneously.
• After finish operation, release the ON / OFF
button (1) to switch off the appliance.
• Wait until the blade (8) stop completely. Then,
unplug it from the electrical supply.
• Turn the main unit (10) clockwise to disas-
sembly the blending part (7) for cleaning.
Note:
1. Press and hold the decreasing and increas-
ing button + (2) or - (3) button for fast ad-
justment.
2. The default blade speed will be set to "3"
once plug in.
EN
7