Operation - Geberit MFP 2 Betriebsanleitung

Operation

Inserting Geberit pressing
attachments
Observe the user manuals of the
Geberit pressing attachments. Check
the pressing attachments according
to the safety chapter.
1
Turn the retaining pin by 180° to the
front and remove it.
2
Insert the pressing attachment into
the pressing tool.
27021600880296075-1 © 02-2018
968.243.00.0 (00)
3
Push the retaining pin in until the
stop position is reached and turn it by
180° to the rear.
Result
✓ The pressing tool is ready for operation.
EN
25