Product Description; Structure And Function - Geberit MFP 2 Betriebsanleitung

Product description

Structure and function

The Geberit pressing tool MFP 2 consists of:
• pressing tool with operating instructions
• pressing jaws with compatibility mark or adapter jaws and pressing collars with compatibility
marks
• carry case
The equipment may vary depending on the scope of delivery.
Item no. Designation
1 Handle
2 Pump lever
Swivelling pressing
3
head
4 Pressing attachment
5 Roller area
6 Retaining pin
Warning and notice
7
sticker
27021600880296075-1 © 02-2018
968.243.00.0 (00)
Function/description
Turning the handle opens or closes the hydraulic valve.
Pressing is performed by actuating the pump lever altern-
ately upwards and downwards.
Can be rotated 180°. This can only be rotated before press-
ing.
• The pressing jaw or pressing collar with adapter jaw
corresponds to the diameter of the pressfitting.
• Only pressing attachments with the compatibility symbol
are compatible with the pressing tool.
• Pressing attachment with warning note sticker
Transfers the press capacity from the pressing cylinder to
the pressing attachment.
Holds the pressing attachment in place
• Warning symbol: hazard from flying fragments
• Safety note: read the operating instructions before
commissioning and using the tool
• Compatibility symbol:
EN
23