Geberit ESG LIGHT Betriebsanleitung Seite 18

EN
• Do not open the electrofusion machine. Only replace defective
connecting cables for electrofusion coupling with the corresponding
spare part from Geberit.
• Defective mains and coupling connection cables should only be
replaced by an authorised repair shop.
• Replace connecting cables for electrofusion coupling with worn
plugs.
For Australian market only:
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
Maintenance and repairs only to be carried out by repair
shops
Electrofusion machines that are not maintained, or are not profes-
sionally maintained, can cause serious accidents.
• Maintain the electrofusion machine according to the regulations.
See "Maintenance", page 26
• Maintenance and repair work may only be performed by authorised
repair shops. For addresses of authorised repair shops, contact
your Geberit sales company or visit www.geberit.com.
Notes in accordance with DIN EN 62841-1
The "Basic safety notes for electric tools" document accompanies the
device. This contains additional safety notes in accordance with DIN
EN 62841-1:2016-07.
18
18014400775144843-1 © 10-2017
967.779.00.0(01)