Caretalk DSO 364 Gebrauchsanweisung Seite 28

Basic functions
2. Push the MEM button
sired time mode. Push the SET button to
save the selected time mode. If the 12 hour
indicator (12 hr) is configured, the PM sym-
bol will appear on the LCD display when
displaying the time.
3. The indicator for hours will blink on the
LCD display and with the MEM button, you
can perform the setting from 1–12 or 1–24
depending on the previously selected time
mode. You can then save the selected val-
ue with the SET button.
4. Now, the indicator for minutes will blink on
the LCD display. With the MEM button, select
a setting from 00–59 and save the set val-
ue with the SET button.
5. Now, the indicator for the calendar year
will blink on the LCD display. With the MEM
button, perform the setting from 2001-
2099 and save the set value with the SET
button.
6. Now, the indicator for the month will blink
on the LCD display. With the MEM button,
select a setting from 1–12 and save the set
value with the SET button.
7. Now, the indicator for the week day will
blink on the LCD display. With the MEM but-
ton, select a setting from 1–31 and save the
set value with the SET button.
8. Finally, the LCD indicator appears on the
LCD display for a short time, immediately
28
to select the de-
9