VEGA VEGAPULS 69 Betriebsanleitung Seite 77

FF desciptor
ADJUSTMENT_LIMITS_MAX
FALSE_SIGNAL_COMMAND
FALSE_SIGNAL_CMD_CREATE_
EXTEND
FALSE_SIGNAL_CMD_DELET_
REGION
FALSE_SIGNAL_CMD_STATE
FALSE_SIGNAL_CMD_CONFIGU-
RATION1
FALSE_SIGNAL_CMD_CONFIGU-
RATION2
ECP_CURVE_AVARAGING_CON-
FIG
LEVEL_ECHO_MEASUREMENT
ECHO_CURVE_STATUS
PACKET_COUNT
GU_ID_END
ECHO_CURVE_READ
ECHO_EVALUATOR
ECHO_DECIDER
DISPLAY_SETTINGS
SIL_MODE
EDENVELOPE_CURVE_FILTER
EDDETECTION_CURVE_FILTER
EDECHO_COMBINATION
LIN_TABLE_A ... LIN_TABLE_Q
ELECTRONICS_INFORMATION
APPLICATION_CONFIG_SERVICE Limitation measuring range begin, safety of measuring range end
LEVEL_ECHO_INFO
DEVICE_STATUS
FALSE_SIGNAL_LIMITS
USER_PEAK_ELEC_TEMP
USER_MIN_MAX_PHYSICAL_VA-
LUE
RESET_PEAK_PHYSICAL_VALUE
RESET_LINEARIZATION_CURVE
DEVICE_STATUS_ASCII
ECHO_CURVE_PLICSCOM_RE-
QUEST
VEGAPULS 69 • Foundation Fieldbus
Description
Max. range min.-/max.- values physical, percent, offset
Busy, last command, errorcode
Amplitude safety of the 0 % curve, safety of the false signal suppression,
position of the 0 % and 100 % curve in near and far range
Gradient of the manual sectors, safety at the end of false echo memory
and depending on the import range gating out the false signals
Averaging factor on increasing and decreasing amplitude
Function measured value filter
Echo curve data
Echo parameters, first large echo, amplitude threshold first large echo
Echo selection criteria, fault signal on loss of echo, delay on fault signal on
loss of echo
Indication value, menu language, lightning
Parameters of envelope curve filter, activation of smooth raw value curve
Parameters of the detection filter, offset threshold value curve
Parameters for echo combination, function combine echoes, amplitude dif-
ference of combined echoes, position difference of combined echoes
32 couples of percentage and lin. percentage values
Electronics version
Level echo ID, amplitude, measurement safety
Device status
False signal distance min./max.
Min.-/max.- values of electronics temperature, date
Min.-/max.- distance values, date
Device status
Parameters as curve selection and resolution
11 Anhang
77