Factory Preset - NEC MultiSync FP Serie Handbuch

AREA CONVERGENCE: A small window will appear to indicate the area
of adjustment — Top Horizontal, Top Vertical, Bottom Horizontal or
Bottom Vertical.
CORNER CORRECTION: Allows you to adjust the geometry of the corners
of your display — Top, Top Balance, Bottom or Bottom Balance.
LINEARITY: The Linearity selection allows you to adjust the spacing of the
areas on the screen. The purpose of this control is to ensure that a 2 cm
circle is a true 2 cm circle wherever it is drawn on the screen. The best
way to determine the vertical linearity is as follows:
• Draw equally spaced horizontal lines using a drawing application that
has a ruler.
• Use the Vertical Balance control to adjust the lines near the top and
bottom of your screen.
• Use the Vertical control to adjust the spacing between the lines near
the centre and top of your screen.
GLOBALSYNC CONTROL: Eliminates picture impurities that may result
from the earth's magnetic field. While in the sub-menus (GLOBALSYNC,
TOP LEFT, TOP RIGHT, BOTTOM LEFT or BOTTOM RIGHT), use the –/+
control buttons to fine tune the GlobalSync corrections.
Note:
SHARPNESS: Allows you to adjust the clarity of the image, based on the
quality of the signal received from the computer.
• Use a full text document to make this adjustment.
• Cycle through the four sharpness settings and select the one that
provides the sharpest focus and contrast of the text.
FACTORY PRESET: Selecting Factory Preset allows you to reset most OSM
settings back to the factory settings. A warning statement will appear to
confirm that you do want to reset ALL settings. Individual settings can be
100
reset by highlighting the control to be reset and pressing the RESET button.
95
? Tools 2
75
LANGUAGE: OSM menus are available in 7 languages.
OSM POSITION: You can choose where you would like the OSM
controls menu to appear on your screen. Selecting OSM Position allows
25
you to manually adjust the OSM controls menu left, right, up or down.
5
0
Downloaded from www.Manualslib.com
NEC recommends that you perform GlobalSync correction while
running a typical application such as a spreadsheet or text
document.
manuals search engine
E - 8