Factory Preset - NEC MultiSync LCD1525S Bedienungsanleitung

E - 14 Controls
OSM Lock Out
This control completely locks out access to all OSM control
functions. When attempting to activate OSM controls while
in the Lock Out mode, a screen will appear indicating the
OSM controls are locked out. To activate the OSM Lock
Out function, simultaneously press and hold down the
PROCEED and button(s). To de-activate the OSM Lock
Out mode, again simultaneously press and hold down the
PROCEED and button(s).

Factory Preset

Selecting Factory Preset allows you to reset all OSM control
settings back to the factory settings. The RESET button will
need to be held down for several seconds to take effect.
Individual settings can be reset by highlighting the control
to be reset and pressing the RESET button.
Resolution Notifier
If ON is selected in this function, message of Resolution
Notifier appears 2 minutes after monitor doesn't recognize
input signal as 1280 x 1024.
Information
Shows the selected video input and USB upstream.
Display Mode: Provides information about the current reso-
lution display and technical data including the preset timing
being used and the horizontal and vertical frequencies.