Bosch GWS 6-115 PROFESSIONAL Bedienungsanleitung Seite 20

Downloaded from www.Manualslib.com
OBJ_BUCH-161-001.book Page 5 Tuesday, June 20, 2006 11:17 AM
Intended Use
The machine is intended for cutting, roughing, and
brushing metal and stone materials without using
water. For cutting stone, a cutting guide is required.
With approved sanding tools, the machine can be
used for sanding with sanding discs.
Noise/Vibration Information
Measured values determined
EN 50144.
Typically the A-weighted noise levels of the machine
are: sound pressure level 89 dB(A); sound power
level 102 dB(A).
Wear hearing protection!
When using the standard auxiliary handle, the typically
weighted maximum acceleration is 5.0 m/s
When using the vibration-dampening auxiliary handle,
the hand-arm vibration is typically lower than 2.5 m/s
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
Technical Data
Angle Grinder
PROFESSIONAL
Article number
Rated power input
Output power
No-load speed
Grinding disc diameter, max.
Thread of grinder spindle
Constant electronic control
Speed preselection
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries, these
values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
1 619 P01 967 • 20.6.06
manuals search engine
1 Spindle lock button
2 On/Off switch
3 Thumbwheel for speed preselection
(GWS 6-115 E / GWS 850 CE)
4 Auxiliary handle
5 Grinder spindle
6 Locking screw for protection guard
7 Protection guard
8 Mounting flange with O-ring
9 Grinding/cutting disc*
according to
10 Clamping nut
11 Quick-clamping nut
12 Carbide grinding head*
13 Hand guard*
14 Rubber sanding plate*
15 Sanding sheet*
2
.
16 Round nut*
2
. 17 Cup brush*
*The accessories illustrated or described are not
included as standard delivery.
GWS... 6-115 6-115 E
0 601 ... 375 0.. 375 7..
375 9..
W 670 670
W 400 400
rpm 11000 2800
– 11000
mm 115 115
M 14 M 14
– –
–
kg 1.4 1.4
/II /II
English–5
*
850 C 850 C 850 CE
377 5.. 377 7.. 378 7..
377 9.. 378 9..
850 850 850
490 490 490
11000 11000 2800
– 11000
115 125 125
M 14 M 14 M 14
– –
1.5 1.5 1.5
/II /II /II