Timer Setting - Danfoss ECtemp Next Plus HW Installationsanleitung

ECtemp Next Plus HW
Default setting value at each event is as below.
Weekday / Weekend
Weekday Staring T
(Mo-Fr)
temp. °C
Weekend Staring T
(Sa-Su)
temp. °C
Working day: Mon Tue Wed Thu Fri;
Off day: Sat Sun

10 Timer setting

• Period setting: When thermostat at Timer mode, setting
in the first period: press and hold for 5 seconds "
display "Mo Tu We Th Fr Sa Su" and "hh:mm" and "hh"
flash, press "
press "
" " or "
" ", the temperature flash and press "
switch between ON and OFF. Using the above method to
set the hour and minute in other periods.
Default setting value at each event is as below.
Everyday
Everyday
© Danfoss | Produced by FEC | 2020.10
Per. 1 Per. 2
23:30 05:00
OFF 50 °C
23:30 05:00
OFF 50 °C
" or " " to adjust hour in the first period;
" till to display "hh:mm" and "mm" flash, press
" to adjust minutes in the first period; press
Staring T
Status
Per. 3 Per. 4
09:00 11:00 13:00
OFF OFF
" or "
Period 1
23:30
OFF
AN347136888492-010101 | 11
Per. 5 Per. 6
16:00
OFF 50 °C
" till to
" to
Period 2
05:00
ON
EN