Computer Instructions - Christopeit Sport CS 1.1 Montage- Und Bedienungsanleitung

Computer instructions for 9918A
The supplied computer allows the most convenient training. Every value
relevant to training is displayed in the window.
From the beginning of the training session, the required time, the current
speed, the approximate calory consumption, the travelled distance, the
travelled distance of all training sessions and the current pulse rate are
displayed. All values are counted from zero upwards.
The computer is switched on by briefl y pressing the F key or simply by
beginning training.
To start the computer, simply begin training. The computer begins to register
and display all values.
To stop the computer, just stop training. The computer stops all measure-
ments and retains the last attained values. The last attained values in the
functions TIME, CALORIES, KM and KM TOTAL are stored and training can
continue with these values when training is resumed.
The computer switches of automatically approx. 4 minutes after training is
stopped. All previously attained values are deleted.
Displays:
With the "F" key, the individual functions can be selected and the associated
data displayed in the window. The selected function is indicated by an icon
in the window beside the printed name of the function.
1. "SCAN" function:
If this function is selected, the current values of all functions are displayed
successively in a constant sequence approx. every 5 seconds.
2. "TIME" display:
The currently required time is displayed in minutes and seconds. A particular
value cannot be specifi ed.
The values last attained by this function are not stored.
(Limit of the display: 99.59 minutes.)
3. "KM/H" display:
The current speed is displayed in kilometres per hour. A particular value
cannot be specifi ed.
The values last attained by this function are not stored.
(Limit of the display: 99.9 km/h.)
4. "KM" display:
The current status of the travelled distance is displayed. A particular value
cannot be specifi ed.
The values last attained by this function are not stored.
(Limit of the display: 999,9 km.)
5. "CALORY" display:
The current status of the consumed calories is displayed. A particular value
cannot be specifi ed.
The values last attained by this function are not stored.
(Limit of the display: 999,9 calories.)
6. "KM TOTAL" display:
The current status of the travelled kilometres of all previous training ses-
sions including current training session is displayed. A particular value
cannot be specifi ed.
The values last attained by this function are not stored.
(Limit of the display: 9.999 km.)
7. "PULSE" display:
The current pulse rate is displayed in beats per minute.
A particular value cannot be specifi ed with the arrow buttons.
The values last attained by this function are not stored.
(Limit of the display: 40 – 240 pulse beats per minute.)
Key functions:
1. "F" key
By pressing this key once briefl y, it is possible to change from one function
to another. The associated values are then displayed in the window.
If the key is held longer (approx. 3 seconds), all last attained values are
deleted with the exception of the values in the "KM TOTAL" display.
2. "L" = Delete:
When this key is pressed briefl y, the values chosen with the "F" key are
reset to zero.
If the key is held longer (approx. 3 seconds), all last attained values are
deleted with the exception of the values in the "KM TOTAL" display.
17