Saeco Dually Bedienung Und Wartung Seite 88

English
The
Technician,
charge of the appliance's
installation, shall make sure
that:
• the power supply system complies with the safety
instructions in force;
• the voltage corresponds to that indicated on the appliance
data plate.
In case of doubt, do not
proceed
installation and ask qualified
and authorised personnel
to accurately check the
system.
Do not use adapters or
multi-sockets.
88
Maintenance
who is in
with the
Depending
regulations in force in the
Country where the machine
is being used, the cable
connecting to the power
supply has to be pre-set or
equipped with an all-pole
switch (with a minimum
contact opening of 3 mm),
or with a plug complying
with the same regulations.
The all-pole switch must
be suitable for machine
input and be able to detect
all voltage polarities.
Make sure that the power
cord plug
reachable after installation.
on the
is easily