Electrolux GA60GLISWE Benutzerinformation Seite 9

Water hardness
1) Factory setting.
2) Do not use salt at this level.
How to set the water softener
level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
2. Press
3. Press
4. Press the on/off button to confirm the
6.3 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
Downloaded from www.Manualslib.com
German de- French de-
grees (°dH) grees (°fH)
47 - 50 84 - 90
43 - 46 76 - 83
37 - 42 65 - 75
29 - 36 51 - 64
23 - 28 40 - 50
19 - 22 33 - 39
15 - 18 26 - 32
11 - 14 19 - 25
4 - 10 7 - 18
<4 <7
hold simultaneously
the indicators ,
start to flash and the display is
blank.
.
• The indicators
go off.
• The indicator
flash.
• The display shows the current
setting: e.g. = level 5.
again and again to
change the setting.
setting.
manuals search engine
mmol/l
8.4 - 9.0
7.6 - 8.3
6.5 - 7.5
5.1 - 6.4
4.0 - 5.0
3.3 - 3.9
2.6 - 3.2
1.9 - 2.5
0.7 - 1.8
<0.7
The rinse aid is automatically released
during the hot rinse phase.
You can set the released quantity of rinse
aid between level 1 (minimum quantity)
and level 6 (maximum quantity). Level 0
will deactivate the rinse aid dispenser and
no rinse aid will be released.
and until
Factory setting: level 4.
and
How to set the rinse aid level
The appliance must be in programme
selection mode.
and
1. To enter the user mode, press and
hold simultaneously
continues to
the indicators
blank.
2. Press
• The indicators
• The indicator
• The display shows the current
ENGLISH
Clarke de- Water softener
grees level
58 - 63 10
53 - 57
46 - 52
36 - 45
28 - 35
23 - 27
5
18 - 22
13 - 17
5 - 12
< 5
1
and
,
start to flash and the display is
.
and
go off.
continues to flash.
setting: e.g. = level 4.
9
9
8
7
6
1)
4
3
2
2)
until
and