Options - Electrolux GA60GLISWE Benutzerinformation

10 www.electrolux.com

7. OPTIONS

Downloaded from www.Manualslib.com
– The levels of rinse aid are from
0A to 6A.
– Level 0 = no rinse aid is
released.
3. Press again and again to change
the setting.
4. Press the on/off button to confirm the
setting.
Use of rinse aid and multi-tablets
When you activate the option Multitab, the
rinse aid dispenser continues to release
rinse aid. However you can deactivate the
rinse aid dispenser. In this case the drying
results may not be satisfactory.
With the rinse aid dispenser deactivated,
the rinse aid indicator is always off.
How to deactivate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
start to flash and the display is
blank.
2. Press .
• The indicators
off.
• The indicator
to flash.
Desired options must be
activated every time before
you start a programme
(except for Multitab). It is not
possible to activate or
deactivate options while a
programme is running.
7.1 Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid and
detergent functions. They can also contain
other cleaning or rinsing agents.
manuals search engine
3. Press
The rinse aid indicator goes off.
4. Press the on/off button to confirm the
6.4 MyFavourite
With this option you can set and save the
programme that you use more frequently.
You can only save 1 programme. A new
setting cancels the previous one.
How to save the MyFavourite
programme
1. Set the programme that you want to
You can also set applicable options
together with the programme.
2. Press and hold MyFavourite until the
and until
, and
How to set the MyFavourite
programme
Press MyFavourite.
and go
continues
This option deactivates the release of salt.
The salt indicator does not come on.
With the use of this option the programme
duration is prolonged to increase the
cleaning and drying results with the use of
multi-tablets.
You do not need to activate the Multitab
option every time you start a programme.
Once you have activated the option it will
remain active.
• The display shows the current
setting: = rinse aid dispenser
activated.
to change the setting.
rinse aid dispenser deactivated.
setting.
save
indicators of the programme and the
options flash for a few seconds.
• The indicators that are related to
the MyFavourite programme and
options come on.
• The display shows the duration of
the programme.
=