Led Indicators - Axis P1355-E Installationsanleitung

Page 18

LED indicators

LED
Network
Status
Power
Status LED when using the Focus Assistant
LED
Status LED on housing electronics (fan/heater)
LED
Power
Downloaded from www.Manualslib.com
Color Indication
Green Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Amber Steady for connection to 10 Mbit/s network. Flashes for network activity.
Unlit No network connection.
Green Steady green for normal operation.
Note: The Status LED can be configured to be unlit during normal operation, or to
flash only when the camera is accessed. To configure, go to Setup > System
Options > LED settings. See the online help files for more information.
Amber Steady during startup, during reset to factory default or when restoring settings.
Red Slow flash for failed upgrade.
Green Normal operation.
Amber Flashes green/amber during firmware upgrade.
Color Indication
Green Step 4: Focus Assistant is enabled
Step 6: The lens is optimally adjusted
Amber Step 4: The camera has been moved, or an object has been inserted in front of
the lens. Exit and restart the Focus Assistant.
Step 6: The lens is less optimally adjusted
Red Step 4: The camera has been moved, or an object has been inserted in front of
the lens. Exit and restart the Focus Assistant.
Step 6: The lens is poorly adjusted
Color Indication
Green OK
Flashing Single flash: Heater error
green Double flash: Fan error
Triple flash: General error
Note: Alarm events will be triggered through the camera's input port. See the
User Manual, available on www.axis.com Contact your Axis reseller for
information about spare parts and troubleshooting.
manuals search engine
AXIS P1355-E/P1357-E Installation Guide