Led Indicators - Axis P13-E Serie Installationsanleitung

LED Indicators

Note
• The Status LED can be configured to be unlit during normal operation. To configure, go
to Setup > System Options > Ports & Devices > LED. See the online help for more
information.
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Setup > System
Options > Maintenance .
Status LED
Green
Amber
Network LED
Green
Amber
Unlit
Power LED
Green
Amber
Housing LED indicators
LED
Color
Status Green
Green, single flash
Green, double flash
Green, triple flash
Status LED Behavior for Focus Assistant
The status LED flashes when the Focus Assistant is active.
Indication
Steady green for normal operation.
Steady during startup. Flashes when restoring settings.
Indication
Steady for connection to a 100 Mbit/s network. Flashes for
network activity.
Steady for connection to a 10 Mbit/s network. Flashes for
network activity.
No network connection.
Indication
Normal operation.
Flashes green/amber during firmware upgrade.
Indication
Normal operation
Heater error
Self test
General error
13
AXIS P13-E Series