Page 6
I/O terminal connector block
Pin
Function
4
Transistor
Output
3
Digital Input
2
3.3V DC
1
GND
LED indicators
LED
Color
Network
Green
Amber
Unlit
Status
Green
Amber
Red
Power
Green
Amber
Downloaded from
www.Manualslib.com
Description
With a maximum load of 50mA and a maximum voltage of 24V DC, this output has an
open-collector NPN transistor with the emitter connected to the GND pin. If used with an
external relay, a diode must be
connected in parallel with the load, for protection against voltage
transients.
Connect to GND to activate, or leave floating (or unconnected) to
deactivate.
Can be used to power auxiliary equipment, max 50mA.
Description
Steady for connection to 100 Mbit/s network. Flashes for network activity.
Steady for connection to 10 Mbit/s network. Flashes for network activity.
No connection.
Shows steady green for normal operation.
Note: The Status LED can be configured to be unlit during normal operation, or to flash only when
the camera is accessed. See the online help files for more information. Go to Setup > System
Options > LED settings
Steady during startup, reset to factory default or when restoring settings.
Slow flash for failed upgrade.
Normal operation.
Flashes green/amber during firmware upgrade.
manuals search engine
AXIS 216FD Installation Guide