JVC Natural Vision T-V LINK AV28CH1EU Bedienungsanleitung Seite 11

REMOTE CONTROL BUTTONS AND FUNCTIONS
14:9 ZOOM:
This mode zooms up the Wide Picture (14:9 Aspect Ratio) to
the upper and lower limits of the screen.
16:9 ZOOM:
This mode zooms up the Wide Picture (16:9 Aspect Ratio) to
the full screen.
16:9 ZOOM SUBTITLE:
This mode zooms up the Wide Picture (16:9 Aspect Ratio)
with subtitles to the full screen.
FULL:
This mode uniformly stretches the left and right sides of a nor-
mal picture (4:3 aspect ratio) to fill the wide TV screen.
Note:
• Use for pictures with a 16:9 aspect ratio that have been
squeezed into a normal picture (4:3 aspect ratio), you
can restore their original dimensions.
Choose the ZOOM mode Choose the ZOOM mode Choose the ZOOM mode Choose the ZOOM mode
Press the c button to display the
1
ZOOM menu.
ZOOM
AUTO
REGULAR
PANORAMIC
14:9 ZOOM
16:9 ZOOM
16:9 ZOOM SUBTITLE
FULL
TV
D0009-EN
Press the 6 buttons to choose a ZOOM
2
mode. Then press the
The picture expands and the chosen ZOOM mode is dis-
played in about 5 seconds.
Note:
• The ZOOM mode may be automatically changed
due to the control signal from an external device.
When you want to return to the previous ZOOM
mode, choose the ZOOM mode again.
10
Downloaded from www.Manualslib.com
BACK
OK
a
button.
manuals search engine
Adjusting the visible area of the pic- Adjusting the visible area of the pic- Adjusting the visible area of the pic- Adjusting the visible area of the pic-
ture ture
ture ture
If subtitles or the top (or bottom) of the picture are cut off, ad-
just the visible area of the picture manually.
Press the c button.
1
The ZOOM menu appears.
a
2
Press the button to display the ZOOM
mode indication.
Indicator is displayed.
16 : 9 ZOOM
D0010-EN
While it is displayed, press the 6 but-
3
tons to adjust the visible area vertically.
Note:
• You cannot adjust the visible area in REGULAR or
FULL mode.
HYPER SOUND Button HYPER SOUND Button
HYPER SOUND Button HYPER SOUND Button
4
You can enjoy sounds with a wider ambience.
Press the / (HYPER SOUND) button to turn
the HYPER SOUND function on or off.
Note:
• The HYPER SOUND function does not work properly with
mono sound.
• The HYPER SOUND function can be also turned on or off
by using the SOUND SETTING menu. For details, see
"HYPER SOUND" on page 18.