Identification Of Symbols - Partner P340S Betriebsanweisung

18
19
20
1. Saw chain
2. Guide Bar
3. Spark Arrester Screen
4. Chain Brake Lever / Hand
Guard
5. Front Handle
6. Starter Handle
7. ON/OFF Switch
8. Safety Trigger
SAFETY FEATURES
Numbers preceding the descriptions correspond with the numbers above to help you locate
the safety feature.
1 LOW KICKBACK SAW CHAIN helps
significantly reduce kickback, or the
intensity of kickback, due to specially
designed depth gauges and guard
links.
3 SPARK ARRESTER SCREEN retains
carbon and
particles over 0.023 inches (0.6mm)
in size from engine exhaust flow.
Compliance with local, state and
federal laws and/or
governing the use of a spark arrester
screen is
bility. See
additional information.
4 CHAIN BRAKE LEVER
GUARD protects the operator's left
hand in the event it slips off the front
handle while saw is running.
Read and understand the Instr-
uction Manual and all warning
labels before using the machine.
Downloaded from www.Manualslib.com
IDENTIFICATION (WHAT IS WHAT?)
2
1
16
15
17
14
21
22
9. Rear Handle / Boot Loop
10. Oil Tank cap
11. Fuel Tank Cap
12. Starter Cover
13. Spiked Bumper
14. Bar Retaining Nuts
15. Muffler Shield
16. Spark Plug
17. Air Cleaner Cover
other flammable
regulations
the user's responsi-
Safety Precautions for
/ HAND

IDENTIFICATION OF SYMBOLS

-- 2 --
manuals search engine
5
4
6
7
3
9
13 12
11
10
18. Choke Lever for Auto
Choke
19. Primer Bulb
20. Throttle/Trigger
21. Saw Chain Adjustment
Screw
22. Chain Catcher
23. Guide-bar Cover
4 CHAIN BRAKE is a safety feature
designed to reduce the possibility of
injury due to kickback by stopping a
moving saw chain in milliseconds. It is
activated by the CHAIN BRAKE lever.
SWITCH immediately
7 STOP
the engine when tripped. Stop switch
must be pushed to ON position to start
or restart engine.
8 SAFETY TRIGGER prevents acciden-
tal acceleration of the engine. Throttle
trigger (20) cannot be squeezed
unless the safety latch is depressed.
22 CHAIN CATCHER reduces the danger
of injury in the event saw chain breaks
or derails during operation. The chain
catcher is designed to intercept a
whipping chain.
Primer Bulb
8
23
stops