Work Area Safety; Starting Up The Machine - Makita UV3600 Original Bedienungsanleitung

• Wear
goggles to protect eyes from
flying objects and debris.
• Wear
prevent injury to fingers.
• Wear dust mask to reduce the
risk of injury.
• When
always wear sturdy shoes with
a non-slip sole. This protects
against injuries and ensures a
good footing.
• While operating the machine,
always
footwear and long trousers.
Do not operate the machine
when barefoot or wearing open
sandals.

Work area safety

• Keep children and bystanders,
including animals, away while
operating the machine.
• Check the work area whether
there are no stones, wires,
glass, or other foreign objects.
Foreign object may be caught up
or flung by the machine, result in
damage or injury.
• Operate the machine under
good
conditions only. Do not operate
the machine in darkness or fog.
• Do not operate machine in
explosive atmospheres, such
as in the presence of flammable
liquids, gases or dust. The
machine creates sparks which
may ignite the dust or fumes.
• Do not expose the machine to rain
or wet conditions. Water entering
Downloaded from www.Manualslib.com
protective glasses
protective gloves
using the machine,
wear substantial
visibility and
manuals search engine
or the machine may increase the
risk of electric shock.

Starting up the machine

to
• Before connect the plug or
switch on the machine:
– Check the plug and cord and
confirm that they are good
condition.
– Check all the screws, nuts
and other fasteners are
properly secured.
– Check cutting tools are in
place and good working
condition.
– Check guards and safe
devices, such as deflectors
or grass catcher, function
well.
– Check the air vents are not
covered by dust or other
foreign
them with a soft brush or
cloth if they are blocked.
– Replace
unreadable labels.
– Check
the machine carefully to
determine
properly and performs its
daylight intended function. Especially,
never use the machine if
the switch does not work
normally.
– Make sure the switch is off
side to prevent unintentional
start.
– Check
maintenance,
adjusting wrench or spanner
are removed.
materials. Clean
damaged
all the parts
if it operates
all tools
such
or
of
for
as
7