Adjustment - Sanyo VDC-C1572FP Bedienungsanleitung

L5QA2/XE, XE2, L7QA2/XE, XE2 GB 2002, 7, 25

ADJUSTMENT

These adjustments are for
colour cameras.
• B/W cameras do not have this DIP
SWITCH
PUSH LOCK
• The DIP SWITCH positions in the
above figure are the factory presets.
• PUSH LOCK MODE: If the push lock
switch is pressed, White Balance will
be adjusted automatically.
Downloaded from www.Manualslib.com
FLICKERLESS ON (1/100 sec.)
FLICKERLESS OFF (1/60 sec.)
BACKLIGHT COMPENSATION OFF
4 5 BACKLIGHT COMPENSATION ON
3 6
MECHANICAL IRIS (DO NOT
2 7
1 8 SELECT THIS POSITION.)
ELECTRONIC IRIS
ON
120 IRE USER SETTING
OFF
1 2 3 4 5 6 7 8
100 IRE SETTING
AGC 26 dB MAXIMUM
AGC 20 dB MAXIMUM
AUTO TRACKING WHITE BALANCE
LINE LOCK
LEVEL
AUTO WHITE BALANCE
VIDEO OUT
LINELOCK
PUSH LOCK
INDOOR (3200° K)
GND
DC IN
OUTDOOR (6500° K)
4200° K
4700° K
LINE LOCK
LEVEL
• FLICKERLESS ON (1/100 sec): When using with a 60 Hz light source (such as a fluorescent light)
• BACKLIGHT COMPENSATION OFF: When backlight compensation is not needed
• 120IRE USER SETTING: When the object is too bright
• AGC 26dB MAXIMUM: When increasing the sensitivity
• AUTO TRACKING WHITE BALANCE: When a single-color object is being illuminated by fluorescent light
• PUSH LOCK: When matching the object to the color in places where the light source does not change
manuals search engine
ADJUSTMENTS
1 2
ON
OFF
ON
OFF
Not available
Use the V.R. to adjust if the backlight compensation is
set to on but compensation is still not correct.
DIP SWITCH
3 4 5 6 7 8
ON
OFF
ON
OFF
ON
OFF
OFF OFF OFF
OFF ON OFF
OFF ON ON
ON OFF OFF
ON ON ON
ON OFF ON
ON ON OFF
4
English