Operating The Walkie−Talkies; Volume Control; Transmitting And Receiving - switel WTF 720 Bedienungsanleitung

4 Operating the Walkie−Talkies
Display and explanation of operation sequences
Switching the walkie−talkies on/off
Switching on
23
Switching off
24

Volume control

Transmitting and receiving

Send
25
Receiving
26
Downloaded from www.Manualslib.com
P
a, P
b, P
[ 2 ]
ð
Turn the volume control clockwise. An acoustic signal is issued.
The currently active channel appears in the display and the Ready
LED flashes.
Turn the volume control anticlockwise until the display content dis-
appears.
Turn the volume control until the required volume is set.
After pressing the P button, the Ready LED lights up.
If the P button is pressed longer than 60 seconds, a warning
signal is issued. Transmission is interrupted.
a, P, ð
Hold the walkie−talkie approx. 5 to 7 cm from your mouth
and speak at a normal volume. In order to talk to other sub-
scribers, the respective walkie−talkies must be set to the
same channel and CTCSS code.
b, P
Radio signals cannot be received when the P button
is being pressed.
manuals search engine
Operating the Walkie−Talkies
Press the button displayed
Press and hold the button
displayed
Release the button displayed
Display indicator flashes
Speak into the microphone
Transmit
Receive
51