Software Upgrade; Factory Default; Version - SetOne Easy One USB-T2H Bedienungsanleitung

4.

Software Upgrade

This STB provide you an easy way for
updating the STB software through USB stick.
Contact your dealer if there is new software
for your STB available, then you can update it
easily with your USB stick through the USB input
of this STB.
1.
2.
3.
4.
5.
6.
7.
8.
5.

Factory Default

The factory default enable you re-set your STB as factory settings mode.
WARNING: You will loss all the settings and channels which you have already tuned.
6.

Version

The version information provides you current hardware and software information of
your STB.
Downloaded from www.Manualslib.com
Copy the bin code file (such as p1.bin)
from PC to your USB device, such as USB stick.
Power on the STB, plug in the USB
disk properly.
Enter the main menu and select the
Software Upgrade item.
Select Download from USB item,
Select the USB device,
such as 0001 /sda.
Select the bin code file, which you
want to be upgraded, such as p1.bin.
STB will upgrade by itself, but
remember that, do not power off.
After being upgraded, system will
restart itself, you will see the new
software interface.
manuals search engine
19