Sharp R-8730-A Bedienungsanleitung Seite 20

R-8730-A [Cov+Eng].qxd
9. Press the MEMORY key.
Notes:
• To select memory number 30, press the NUMBER keys 3 and 0, or simply press the NUMBER key 0.
• If you wish to change other preset memory programmes continually, press desired memory number key
• The preset reduce factors of the memory banks are suitable for each cooking programme. It is
3b. TO CHANGE THE REDUCE FACTORS
Example: Suppose you want to reduce the factor in memory 23 (0.92) to 0.8.
1. Press the MEMORY key and hold for
4. Set the reduce factor.
Notes:
• To select memory number 30, press the NUMBER keys 3 and 0, or simply press the NUMBER key 0.
• The reduce factor can be set from 0.00 to 0.99
• If you wish to change the reduce factor in other memories continually, press desired memory number key
Downloaded from www.Manualslib.com
1/29/07 12:19 PM
OTHER CONVENIENT FUNCTIONS
10. Press the STOP key to release the memory setting mode.
x1
prior to setting the STOP key. After selecting the memory number, follow the above example.
recommended to change it corresponding with new programmes you set.
The reduce factor is preset for each memory programme separately, but you can alter the factor to suit
your needs.
For preset reduce factor, see page GB-5.
5 seconds until the singal sounds twice.
MEMORY indicator light will come on.
x1 for 5 seconds
5. Press the
x1
x1
prior to pressing the STOP key. After selecting the memory number, follow the above example.
manuals search engine
Page 19
2. Press the TIME
REDUCE key.
x1
6. Press the STOP key to release
the memory setting mode.
MEMORY key.
x1
GB-14
x1
3. Select the MEMORY number. Press
the NUMBER 3 key to change the
flashing number 1.
x1
x1