GB
Downloaded from
www.Manualslib.com
and is achieved by moving the car seat
headrest up or down.
7.
Always check the height of the shoulder
straps and make sure they are correctly
adjusted at the same level of the shoulders
or slightly above (Pic .30)
8.
To raise or lower the shoulder straps and
the headrest: grip the lever (Pic. 31) in the
rear of the backrest and move upwards or
downwards until the shoulder straps are
adequately leveled.
9.
Release the lever to lock the headrest and
the harness in the required position.
10.
Pull the harness adjustment strap (Pic.32),
at the front of the car seat, until the har-
ness is a comfortable, snug fit on the child's
body.
Notes: To better protect your child
Make sure your child is securely fastened in
the safety seat and the harness snugly fits over
his/her body.
Never leave your child unattended in the safety
seat or in the vehicle.
When installing your child on the rear seat of
the vehicle, move the front seat forward far
enough to avoid his feet hitting the backrest
of the front seat (this may also prevent risk of
injury, in the case of an accident).
When entering in or exiting your child from the
vehicle, do it only on the safe side of the street,
away from traffic.
During long journeys stop regularly, children
get tired easily.
IV. Advices
Things to do
•
Before fitting your car seat, read these in-
structions carefully. Remember, an incorrect
installation could be dangerous.
•
Save these instructions in a safe place,
preferably in the car seat instructions com-
partment below the seat frame, or in the
vehicle so that you can find them for future
reference.
•
Ensure that once the child seat is fitted, none
of its harness straps or of the car seat belts
can become trapped by the vehicle seat mo-
ving parts or the vehicle's door.
•
Make sure every time you use the car seat
that the vehicle's seat belt is tight and the car
seat is held firmly in place.
•
Check every time you fit the child seat
that the vehicle seat belt has not become
twisted.
26
manuals search engine
•
Check every time you place your child in the
car seat that the safety harness is properly
adjusted and the buckle is correctly locked.
•
Car interiors may become very hot when left
standing in direct sunlight - it is therefore re-
commended that the car seat, when not in
use, is covered by a towel etc.; this prevents
components, particularly those attached to
the child seat, becoming hot and burning
the child.
•
Regularly check the car seat for signs of
wear, especially the cover, the harness web-
bing and its buckle.
•
Before travelling, check that luggage or any
moving object, especially heavy or sharp
objects, are secured in the car; loose objects
are liable to cause injury in the event of an
accident.
•
When travelling with other passengers, for
safety reason, lighter occupants should be
preferably in the rear of the vehicle and the
heavier occupant in the front passenger
seat; moreover, check that all passengers
travelling with you have their seat belt fa-
stened.
•
Whenever the car seat is left in the vehicle
without the child in it, always ensure it is
correctly fitted using the vehicle's seat belt,
preventing it from being thrown about in an
accident.
Things NOT to do
•
Never use the child seat without fastening the
child's harness correctly and never attempt
to use it without fastening it into the car, as
described in these fitting instructions.
•
Never place any padding between the base
of the car seat and the vehicle's seat, as this
could impair the safety of the car seat.
•
Do not add to or modify this product, in any
way.
•
Never use spare parts that are not recom-
mended or supplied by the manufacturer.
•
Should any unauthorized modification be
made to this child seat, its safety could be
jeopardized; the manufacturer solely being
authorized to make any modification.
•
Do not leave a child unattended in the seat
or in the vehicle, at any time.
•
Never allow children to play with the car
seat.
•
Never install nor take out of the car this child
seat with your child in it.
•
This car seat must not be used without the
cover.
•
The seat cover should not be replaced with
any other than the one recommended by the
manufacturer, since the cover constitutes an