Product Description - VOLTCRAFT VC-530 Bedienungsanleitung

If you have a reason to believe that the device can no longer be operated safely,
disconnect it immediately and secure it against being operated unintentionally. It
can be assumed that safe operation is no longer possible if:
- the device is visibly damaged,
- the device no longer works
- the unit was stored under unfavourable conditions for a long period of time or
- if it has been subjected to considerable stress in transit.
Do not switch the measuring instrument on immediately after it has been taken from
a cold to a warm environment. Condensation that forms might destroy your device.
Leave the device switched off and wait until it has reached room temperature.
Make current measurements with the device if no measurement lines are attached
to the device.
Be exceptionally careful when measuring on current conductors and non-insulated
conductors - there is a risk of an electric shock. Wear protective equipment (e.g.
gloves, etc.) in accordance with the applicable safety guidelines in order to prevent
injury from electric shocks and arcs, etc.
Do not leave the packaging material lying around carelessly since such materials
can become dangerous toys in the hands of children.
Do not work on your own, so that help can be provided if necessary.
You should also heed the safety instructions in each chapter of these instructions.

Product Description

The measurement values are displayed on the clamp-on ammeter. The measuring
value display of the DMM comprises 6000 counts (count = smallest display value).
The clamp-on ammeter can be used for hobbies or professional applications.
The clamp-on ammeter allows measuring currents of up to 1000A without the hav-
ing to interrupt the conductor to be measured.
34