Technical Data - EINHELL GC-LC 18/20 Li T Originalbetriebsanleitung

manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
•
Cut injuries if no safety clothing is used.
•
Lung damage if no suitable protective dust
mask is used.
•
Damage to hearing if no suitable ear protec-
tion is used.
•
Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
Danger!
The electric power tool generates an electro-
magnetic fi eld during operation. Under certain
circumstances this fi eld may actively or passively
impede medical implants. To reduce the risk of
serious or fatal injuries, we recommend persons
with medical implants to consult their doctor and
the manufacturer of the medical implant prior to
using the equipment.

4. Technical data

Pole-mounted pruner
Cutter bar length: ................................... 200 mm
Max. cutting length: ................................ 195 mm
Chain pitch: .................................... 3/8", 33 teeth
Chain thickness: ......................... (0.043") 1.1 mm
Sprocket wheel: ............................... 5 teeth, 3/8"
Cutting speed
at rated rpm: .............................................5.5 m/s
Oil tank capacity: ..................................... 70 cm³
Net weight without accessories: .................3.4 kg
Saw chain: ............................ Oregon/90PX033X
Cutter bar: ......................... Oregon 084LNEA041
Protection class: ................................................III
Anl_GC_LC_18_20_Li_T_SPK9.indb 23
GB
Important!
The equipment is supplied without batteries and
without a charger is allowed to be used only with
the lithium-ion batteries of the Power X-Change
series!
The lithium-ion batteries of the Power X-Change
series are allowed to be charged only with the
Power-X charger.
Danger!
Sound and vibration
L sound pressure level ..................... 75.9 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ....................... 91.3 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with ISO 22867.
Handle under load
Vibration emission value a
K uncertainty = 1.5 m/s
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
- 23 -
= 1.969 m/s
2
h
2
28.10.2020 08:13:19