Proper Use; Technical Data - EINHELL GE-CG 12 Li Originalbetriebsanleitung

3. Proper use

The equipment is designed for cutting the edges
of lawns and small areas of grass in private and
hobby gardens.
Tools for private and hobby gardens are not sui-
table for use in public facilities, parks and sport
centers, along roadways, on farms or in the fore-
stry sector. For the tool to be used properly it is
imperative to follow the instructions set out in the
manufacturer's directions for use.
Warning! It is prohibited to use the tool to
chop material for composting because of the
potential danger to persons and property.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case
of misuse. The user / operator and not the manu-
facturer will be liable for any damage or injuries of
any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Speed n : ............................................. 1200 rpm
0
Cutting width of the grass cutter: ............ 100 mm
Cutting width of the shrub shears ........... 190 mm
Cutting thickness of the shrub shears ........ 8 mm
Running time max.: .................................100 min
Battery pack: ................ Li-Ion / 12 V d. c. / 1.5 Ah
Charging time: ................................................ 2 h
L sound pressure level: ...................... 61 dB (A)
pA
L sound power level: ......................... 81 dB (A)
WA
K uncertainty ................................................. 6 dB
Vibration max. a : ................................... 5.5 m/s
h
K uncertainty ............................................1,5 m/s
Weight: .......................................................1.4 kg
Sound pressure level
at the operator's ear .............................. 77 dB (A)
K uncertainty ................................................. 3 dB
Battery charger
Mains voltage.....................100-240 V ~ 50-60 Hz
Anl_GE-CG_12_Li_SPK9.indb 18 Anl_GE-CG_12_Li_SPK9.indb 18
GB
Output
Rated voltage .......................................... 13 V DC
Rated current: .......................................... 900 mA
•
The vibration emission level has been measu-
red in accordance with a set of standardized
criteria and can be used to compare one po-
wer tool with another.
•
The specified emission level can also be
used to make an initial assessment of the ex-
posure to vibrations.
Warning!
The vibration emission level may vary from the le-
vel specifi ed during actual use, depending on the
way in which the power tool is used.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
2
maintained.
2
- 18 -
25.04.2017 08:59:23 25.04.2017 08:59:23