Appliance Self-Test; Starting The Appliance Self-Test; Ending The Appliance Self-Test; Customer Service, Product / Production Number And Technical Data - Bosch KDD Serie Gebrauchsanleitung

Appliance self-test

Your appliance features an automatic
self-test program which shows you
sources of faults which may be repaired
by customer service only.

Starting the appliance self-test

1. Pull out the appliance plug or switch
off the fuse and wait 5 minutes.
2. Plug the appliance back in or switch
on the fuse and within the first
2 minutes press and hold freezer/
fridge button for 3 seconds until an
audible signal sounds.
The self-test programme will start.
If the self-test ends and an audible signal
sounds twice, your appliance is in
working order.
If 5 audible signals sound, there is an
error. Notify customer service.

Ending the appliance self-test

When the programme has ended, the
appliance switches over to normal
operation.
Customer service,
product / production
number and technical
data
Customer service
If you have any queries, are unable to
rectify faults on the appliance yourself or
if your appliance needs to be repaired,
contact Customer Service.
You can solve many problems yourself
by consulting the information on
troubleshooting in these instructions or
on our website. If this is not the case,
contact our Customer Service.
We will always find an appropriate
solution and try to avoid unnecessary
visits being made by a Customer Service
technician.
With any warranty claims, we will make
sure that your appliance is repaired by
trained Customer Service technicians
using genuine spare parts, including
after the manufacturer's warranty has
expired.
For safety reasons, repairs to the
appliance should only be carried out by
trained specialist staff. The warranty
claim becomes void if repairs or
interventions have been carried out by
persons not authorised by us for that
purpose or if our appliances have been
fitted with spare, supplementary or
accessory parts that were not genuine
parts and then resulted in a defect.
Function-relevant genuine spare parts
according to the corresponding
Ecodesign Directive can be obtained
from Customer Service for a period of at
least 10 years from the date on which
your appliance was placed on the market
within the European Economic Area.
en
49