Disposal Information; Declaration Of Conformity; Exemption From Liability; Warning - WOLFF WS125 18.0V Originalbetriebsanleitug

WS125 18.0V
Regularly blow out the housing interior

and motor with dry compressed air.
Regularly clean the filter cover.

Remove filter cover and blow it out with dry
compressed air.
Gears
NOTE
Do not loosen the screws on the gear head
during the warranty period. Non-compliance
will deem the guarantee obligations of the
manufacturer null and void.
Repairs
Repairs may be carried out by an authorised
customer service centre only.
Spare parts and accessories
For other accessories, in particular grinding
tools, see the manufacturer's catalogues.
Exploded drawings and spare-part lists can
be found on our homepage:
www.wolff-tools.com

Disposal information

WARNING!

Render redundant power tools unusable:
mains operated power tool by removing
–
the power cord,
battery operated power tool by removing
–
the battery.
EU countries only
Do not throw electric power tools into the
household waste!
In accordance with the European Directive
2012/19/EC on Waste Electrical and Electronic
Equipment and transposition into national law
used electric power tools must be collected
separately and recycled in an environmentally
friendly manner.
Raw material recovery instead of waste
disposal.
Device, accessories and packaging should be
recycled in an environmentally friendly manner.
Plastic parts are identified for recycling
according to material type.
WARNING!
Do not throw batteries into the household
waste, fire or water. Do not open used
batteries.
EU countries only:
In accordance with Directive 2006/66/EC
defective or used batteries must be recycled.
NOTE
Please ask your dealer about disposal
options!

-Declaration of Conformity

We declare under our sole responsibility that the
product described under "Technical
specifications" conforms to the following
standards or normative documents:
EN 60745 in accordance with the regu-lations
of the directives 2014/30/EC,
2006/42/EC, 2011/65/EC.
Responsible for technical documents:
Uzin Utz Tools GmbH & Co. KG R&D
Ungerhalde1, D-74360 Ilsfeld
Dieter Hammel
Manager R&D
Dipl.Ing (FH)
01.07.2020;
Uzin Utz Tools GmbH & Co. KG R&D
Ungerhalde1, D-74360 Ilsfeld

Exemption from liability

The manufacturer and his representative
are not liable for any damage and lost profit due
to interruption in business caused
by the product or by an unusable product.
The manufacturer and his representative are not
liable for any damage which was caused
by improper use of the product or by use of the
product with products from other manu-
facturers.
23