Abschnitt: Installation; Abschnitt: Instandhaltung - Endress+Hauser Micropilot FMR20 MODBUS RS485 Betriebsanleitung

Micropilot FMR20 MODBUS RS485
Adresse Name
5202 STD_ENPDEVICEORDERCODEAPS2
5212 STD_ENPDEVICEORDERCODEAPS3
5222 STD_MAINBOARDSERIALNUMBER
5232 LCRS_MODULESERIALNUMBER
5242 MODB_LOCATION_LONGITUDE
5244 MODB_LOCATION_LATITUDE
5246 UIDHPM_HO_LONGTAG_0
Adresse Name
5264 LE_FULL
5262 LE_EMPTY
5266 LCRS_DISTANCESELECTIONCONT-
ROL
5267 LCRS_MAPPING_ENDPOINTCTRL
Adresse Name
5269 STD_RESETLEVEL
5270 STD_USERLEVEL
5271 STD_ACCESSCODE
5272 LCRS_ENTERPRIVATEC-
ODE
5273 LCRS_CONFIRMPRIVA-
TECODE
5274 LCRS_SIMULATION-
MODE
5275 LE_SIMULATVALUE
Endress+Hauser
Anzahl Zugriff
Register • Service
• Bediener
10 • read/write
• read only
10 • read/write
• read only
10 • read/write
• read only
10 • read/write
• read only
2 • read/write
• read only
2 • read/write
• read only
16 • read/write
• read only
15.1.5

Abschnitt: Installation

Anzahl Regis- Zugriff
ter • Service
• Bediener
2 • read/write
• read only
2 • read/write
• read only
1 • read/write
• read only
2 • read/write
• read only
15.1.6

Abschnitt: Instandhaltung

Anzahl Zugriff Bereich
Register • Service
• Bediener
1 • read/write to factory defaults:
• read only 33053
1 • read only maintenance: 32959
• read only user: 33014
1 • read/write 0 ... 9 999
• read/write
1 • read/write 0 ... 9 999
• read only
1 • read/write 0 ... 9 999
• read only
1 • read/write no simulation: 0
• read only distance simulation: 2
2 • read/write 0 ... 22
• read only
Bereich Datentyp SI-Ein-
heit
- string -
- string -
- string -
- string -
–180 ... 180 float32 °
–90 ... 90 float32 °
- string -
Bereich Datentyp SI-Einheit Beschreibung
0 ... 20 float32
0 ... 20 float32
distance ok: 32859 enum16
manual map: 179
delete map: 32847
0 ... 20 float32
Datentyp SI-Ein-
heit
enum16 -
enum16 -
uint16 -
uint16 -
uint16 -
enum8 -
float32 m
Bedienmenü
Beschreibung
Extended order code part2
Extended order code part3
Mainboard (electronics) serial
number
Module (electronics) serial num-
ber
Configurable GPS coordinate
longitude
Configurable GPS coordinate
latitude
Bluetooth tag (device name
shown in SmartBlue app)
m Full calibration
m Empty calibration
- Customer map selection
m Customer map distance
Beschreibung
Device parameter reset
Access level
Register to enter the access code
Register to change the Maintenance
access code
Register to confirm the Maintenance
access code
Simulation mode
Simulation value, if LCRS_SIMULA-
TIONMODE is set to 2
71