Safety Precautions; Installation; Package Contents; Installing Components - OHAUS Valor 2000W Serie Bedienungsanleitung

Valor™ 2000W Series
1. INTRODUCTION
This manual contains installation, operation and maintenance instructions for the
Valor™ 2000W Series. Please read the manual completely before using the scale.

1.1 Safety Precautions

Please follow these safety precautions:
 Verify that the AC Adapter input voltage matches the local AC power supply.
 Do not drop loads on the platform.
 Do not place the scale upside down on the platform.
 Disconnect the scale from power supply when cleaning.
 Operate the scale only under ambient conditions specified in these
instructions.
 Service should be performed only by authorized personnel.
 Only use weights within the scale's capacity as specified in these instructions.
 Do not operate the scale in hostile environments.
 Do not carry the scale by the pan or sub-platform. Use the handholds on the
side of the scale housing.

2. INSTALLATION

2.1 Package Contents

 Scale
 Stainless Steel Pan

2.2 Installing Components

Place the stainless steel pan onto the weighing platform before turning the scale on.
Figure 2-1. Install the stainless steel pan onto the weighing platform
 Power Adapter & Plug
 Instruction Manual
EN-1
 Warranty Card