Specifications - Makita BTD130F Betriebsanleitung

ENGLISH
1 Red part
2 Button
3 Battery cartridge
4 Switch trigger
5 Lamp
6 Reversing switch lever
7 Bit
8 Sleeve
9 Bit-piece

SPECIFICATIONS

Capacities
No load speed (min
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
CORDLESS IMPACT DRIVER
SAFETY WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator
an electric shock.
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
Downloaded from www.Manualslib.com
(Original instructions)
Model
Machine screw
Standard bolt
High tensile bolt
–1
)
Impacts per minute
Overall length
Net weight
Rated voltage
manuals search engine
Explanation of general view
10 Hook
11 Screw
12 Groove
13 Standard bolt
14 Fastening torque
15 Proper fastening torque
16 Fastening time
17 High tensile bolt
18 Limit mark
BTD130F BTD140
0 – 2,400
146 mm
1.4 kg
D.C. 14.4 V
3. Hold the tool firmly.
4. Wear ear protectors.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product.
ENE033-1
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
GEA010-1
IMPORTANT SAFETY INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using bat-
tery.
2. Do not disassemble battery cartridge.
GEB054-1
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any conduc-
(2) Avoid storing battery cartridge in a container
19 Rear cover
20 Screws
21 Spring
22 Arm
23 Recessed part
24 Carbon brush cap
25 Hole
BTD141
4 mm – 8 mm
5 mm – 14 mm
5 mm – 12 mm
0 – 2,300
0 – 3,200
145 mm
1.3 kg
D.C. 18 V
tive material.
with other metal objects such as nails, coins,
etc.
BTD142
146 mm
ENC007-5
5