Connection To An Audio System (Dolby Digital, Mpeg2 Or Dts Amplifier) - Samsung DVD-FP580W Bedienungsanleitung

Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)

1
If using a coaxial cable (not included), connect the DIGI-
TAL AUDIO OUT (COAXIAL) terminal on the rear of the
DVD player to the DIGITAL AUDIO IN (COAXIAL) termi-
nal of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO,
COMPONENT or HDMI OUT (DVD-F1080 only) terminals
on the rear of the DVD player to the VIDEO, COMPO-
NENT or DVI IN terminals of your TV as described on
pages 9 to 12.
3
Turn on the DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select
external input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 26 to 27)
- The position of terminals can vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
14
Coaxial Cable
(not included)
Dolby digital or
DTS amp