Connection To An Audio System (Dolby Digital, Mpeg2 Or Dts Amplifier) - Samsung DVD-P181 Bedienungsanleitung

Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)

1
If using an optical cable (not included), connect the DIGI-
TAL AUDIO OUT terminal on the rear of the DVD player to
the DIGITAL AUDIO IN ( terminal of the Amplifier.
If using a coaxial cable (not included), connect the DIGI-
TAL AUDIO OUT (COAXIAL) terminal on the rear of the
DVD player to the DIGITAL AUDIO IN (COAXIAL) termi-
nal of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO termi-
nals on the rear of the DVD player to the VIDEO terminal
of TV.
3
Turn on the DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select
external input in order to hear sound from the DVD player.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 22)
- The position of terminals can vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
Coaxial Cable
(not included)
Dolby Digital or DTS Amp
11