Connection To An Audio System (Dolby Digital, Mpeg2 Or Dts Amplifier) - Samsung DVD-P171 Bedienungsanleitung

Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)

1
If using a coaxial cable (not included), connect the DIGI-
TAL AUDIO OUT (COAXIAL) terminal on the rear of the
DVD player to the DIGITAL AUDIO IN (COAXIAL) termi-
nal of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO,
COMPONENT OUT terminals on the rear of the DVD play-
er to the VIDEO, COMPONENT IN terminal of your TV as
described on pages 9 to 11
3
Turn on the DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select
external input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- When you connect the DVD player to DTS Amplifier and play a DTS disc, set the DTS to On in
Audio Setup menu. If it is set to Off, sound doesn't come out or there will be a big noise.
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 25)
- The position of terminals can vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
Coaxial Cable
(not included)
or
13