Connection To An Audio System (Dolby Digital, Mpeg2 Or Dts Amplifier) - Samsung dvd p191 Bedienungsanleitung

connections

Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)

1
If using a coaxial cable, connect the DIGITAL AUDIO OUT
(COAXIAL) terminal on the rear of the DVD player to the
DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO termi-
nals on the rear of the DVD player to the VIDEO terminal
of your TV as described on pages 9.
3
Turn on the DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select
external input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to
the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 26)
- The position of terminals can vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
14_ connections
Coaxial Cable
Dolby digital or
DTS amp