Updating The Software - Strong Digital TV SRT 4600 Bedienungsanleitung

UPDATING THE SOFTWARE

To keep you up-to-date with the latest
developments in digital television, new
features may be made available to your set-
top box in the form of a software update.
These updates are sent as part of the
broadcasts your set-top box already receives.
Whenever a software update is available, a
message is sent to your set-top box. It is part
of the Premiere service, so you will see this
message if you are watching a Premiere
channel.
Receiving the update information
When an update is available, and the message
appears, we recommend that you start the
update immediately.
Note: This may take up to 15 minutes.
If you do not want to update immediately, you
can either:
• set your set-top box to be updated
automatically later on, or
• refuse the automatic update.
Starting the update immediately
To start the update immediately, press the OK
button. Another message is displayed,
explaining more about the update and giving
you the choice of starting the update or
refusing. Press the OK button to continue.
As the update is carried out, a progress bar is
displayed. When the update is complete, your
set-top box will then store its new software
and start using it.
IMPORTANT You must not switch your set-
top box off while it is storing the new software,
regardless of how you start the update.
38
Downloaded from www.Manualslib.com manuals search engine
Setting your set-top box to be updated later
To set your set-top box to be updated later on,
press the blue button.
Nothing will happen until you press the S
button to put your set-top box into standby.
After that, the next time you bring your set-top
box out of standby, the update will take place.
Refusing the automatic update
If you choose not to update, press Exit. We
do, however, recommend that you carry out a
software update from the Premiere menu
(see below) as soon as is conveniently
possible, to make sure you have all the latest
features. If you refuse three times, you will not
be asked again until a further upgrade is
available.
Note: In some instances, your set-top box
may be updated automatically without giving
you the option to refuse the update.
If this happens, the update will occur when you
take your set-top box out of standby or
change channel to a Premiere channel.
UPDATING SOFTWARE FROM THE
PREMIERE MENU
When a software update is available, you can
start it from the menus.
Press the Menü button to display the Main
menu, select Premiere menu, then select
Software update.
Follow the on-screen instructions. Once the
update has started, a progress bar is
displayed. When the update is finished, your
set-top box will start up with its new software.