Strong Digital TV SRT 4600 Bedienungsanleitung Seite 74

CUSTOMISING YOUR SATELLITE DISH
Editing the L.O. value(s)
You can change (edit) the L.O. (local oscillator)
frequency so that it matches that of the LNB
on your dish(es).
Use the
in the drawing (a little yellow arrow is next to it
when it is highlighted). When you do this,
details about that dish's LNB (type or L.O.
frequency) appear on the screen.
If you wish to change the L.O. value, press the
OK button.
If you do this, a pop-up list appears. Use the
buttons to move the highlighting line by
line, (or the page (Seite) + and – buttons to
move it page by page) though the list, until the
L.O. setting you want is highlighted.
If the L.O. frequency you want is on the list,
press OK. (Or press Exit to remove the pop-up
list without saving any changes).
If the L.O. frequency you want is not on the list,
you can create your own. Highlight Single L.O.
(or Double L.O., as appropriate) on the list and
then press OK. Use the number buttons to
enter the L.O. frequency you want on the
screen that appears, then press OK.
30
Downloaded from www.Manualslib.com
or buttons to highlight a dish
manuals search engine
Editing the satellite(s)
You can change (edit) the satellite to match the
one that your dish points at.
Use the or buttons to highlight a
satellite name in the drawing (a little yellow
arrow is next to it when it is highlighted). When
you do this, details about that satellite (name
and position) appear on the screen.
If you wish to change the satellite, press the
OK button.
If you do this, a pop-up list appears. Use the
buttons to move the highlighting line by
line, (or the page (Seite) + and – buttons to
move it page by page) though the list, until
satellite you want is highlighted.
If the satellite you want is on the list, press OK.
(Or press Exit to remove the pop-up list
without saving any changes).