Santec VTC-279IRP/W Bedienungsanleitung Seite 25

Bedienungsanleitung / User Manual VTC-279IRP/W / VTC-282IRP/W / VTC-289IRP/W
Lens Option:
The lens control is pre-set to DC.
By pressing the joystick, a menu pops up. You can then adjust the brightness (0–70). Press
the joystick again to save your settings.
Exposure:



White Balance:





Backlight:


DNR (Digital Noise Reduction):
Noise can be reduced. If the DNR value is increased and thus the noise is reduced, artefacts
may occur.
If AGC is switched off, the DNR function is off, too.
_________________________________________________________________________________
Downloaded from www.Manualslib.com
Shutter:
The flickerless mode (FLK) reduces picture flickering.
AGC (Automatic Gain Control):
Automatic gain control to adjust the brightness (high, medium, off). The brightness
can be re-adjusted.
Sens-Up:
OFF or AUTO. In auto-mode you can select values from 2x to 256x in order to
achieve a better picture under low light conditions or in darkness. Noise may occur.
This function can be de-activated if the shutter is set to FLK mode.
ATW:
Auto Tracking White Balance for colour temperatures of 1800°K to 10500°K.
Indoor:
For colour temperatures of 4500°K to 8500°K.
Outdoor:
For colour temperatures of 1800°K to 10500°K.
AWC -> Set:
Auto White Balance Control. Automatic white balance if you hold a white sheet of
paper infront of the camera and press the joystick (sufficient light conditions required).
Manual:
The red and blue values can manually be set.
BLC:
If the lens is exposed to strong backlight, you can activate the „backlight" function in
order to achieve a clear picture of both the object itself and the background.
HLC:
Highlight Compensation. Highlights in the picture can be deleted which makes the
picture sharper.
manuals search engine
- 25 -