Installing Windows - ASROCK 990FX Extreme3 Handbuch

2.10 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.

2.11 Installing Windows

If you want to install Windows
bit on your SATA3 HDDs with RAID functions, please refer to the document at the
following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
2.12 Installing Windows
If you want to install Windows
OS on your SATA3 HDDs without RAID functions, please follow below procedures
according to the OS you install.
2.12.1 Installing Windows
If you want to install Windows
functions, please follow below steps.
Using SATA3 HDDs without NCQ and Hot Plug functions (IDE mode)
STEP 1: Set up UEFI.
A.Enter UEFI SETUP UTILITY
B.Set the option "SATA Mode" to [IDE].
STEP 2: Install Windows
32
Downloaded from www.Manualslib.com
TM
Vista 64-bit / XP / XP 64-bit With RAID Functions
TM
Vista 64-bit / XP / XP 64-bit Without RAID Functions
Functions
®
XP / XP 64-bit OS on your system.
ASRock 990FX Extreme3 Motherboard
manuals search engine
®
7 / 7 64-bit / Vista
® TM
7 / 7 64-bit / Vista / Vista
®
7 / 7 64-bit / Vista
® TM
7 / 7 64-bit / Vista / Vista
®
XP / XP 64-bit Without RAID
®
XP / XP 64-bit on your SATA3 HDDs without RAID
Advanced screen
TM
/
TM
64-bit / XP / XP 64-
TM
/
TM
64-bit / XP / XP 64-bit
Storage Configuration.