ASROCK 990FX Extreme3 Handbuch Seite 33

2.12.2 Installing Windows
If you want to install Windows
HDDs without RAID functions, please follow below steps.
Using SATA3 HDDs without NCQ and Hot Plug functions (IDE mode)
STEP 1: Set up UEFI.
A.Enter UEFI SETUP UTILITY
B.Set the option "SATA Mode" to [IDE].
STEP 2: Install Windows
Using SATA3 HDDs with NCQ and Hot Plug functions (AHCI mode)
STEP 1: Set up UEFI.
A.Enter UEFI SETUP UTILITY
B.Set the option "SATA Mode" to [AHCI].
STEP 2: Install Windows
2.13 Untied Overclocking Technology
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter "Overclock Mode" option of UEFI
setup to set the selection from [Auto] to [Manual]. Therefore, CPU FSB is untied
during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can
operate under a more stable overclocking environment.
Downloaded from www.Manualslib.com
Without RAID Functions
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
tem.
®
7 / 7 64-bit / Vista
system.
Please refer to the warning on page 9 for the possible overclocking risk
before you apply Untied Overclocking Technology.
ASRock 990FX Extreme3 Motherboard
manuals search engine
® TM
7 / 7 64-bit / Vista
TM
/ Vista
Advanced screen Storage Configuration.
TM TM
/ Vista
Advanced screen Storage Configuration.
TM TM
/ Vista
TM
/ Vista 64-bit
TM
64-bit on your SATA3
64-bit OS on your sys-
64-bit OS on your
33