Inhaltsverzeichnis
Werbung
All manuals and user guides at all-guides.com
2.12 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from top to bottom to
install those required drivers. Therefore, the drivers you install can work properly.
®
2.13 Installing Windows
RAID Functions
®
If you want to install Windows
/ SATA2 / SATA3 HDDs with RAID functions, please refer to the document at the
following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
®
2.14 Installing Windows
XP 64-bit Without RAID Functions
®
If you want to install Windows
7 / 7 64-bit / Vista
OS on your SATA / SATA2 / SATA3 HDDs without RAID functions, please follow the
procedures below according to the OS you install.
2.14.1 Installing Windows
®
If you want to install Windows
XP / XP 64-bit OS on your SATA / SATA2 / SATA3
HDDs without RAID functions, please follow the steps below.
AHCI mode is not supported under Windows
Using SATA / SATA2 / SATA3 HDDs without NCQ function
STEP 1: Set Up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode Selection" to [IDE]. (For SATA2_2 to SATA2_5,
SATA3_0 and SATA3_1 ports.)
Set the option "ASMedia SATA3 Mode" to [IDE]. (For SATA3_A0 and SATA3_A1
ports.)
®
STEP 2: Install Windows
XP / XP 64-bit OS on your system.
ASRock H77 Pro4-M Motherboard
TM
TM
7 / 7 64-bit / Vista
/ Vista
TM
TM
7 / 7 64-bit / Vista
/ Vista
64-bit on your SATA
TM
TM
7 / 7 64-bit / Vista
/ Vista
TM
TM
/ Vista
64-bit / XP / XP 64-bit
®
XP / XP 64-bit Without RAID Functions
®
XP / XP 64-bit.
Advanced screen
Storage Confi guration.
64-bit With
64-bit / XP /
35
Werbung
Inhaltsverzeichnis
