ASROCK 990FX Extreme3 Handbuch Seite 17

2.5 SLI
This motherboard supports NVIDIA
technology that allows you to install up to three identical PCI Express x16 graphics
cards. Currently,
Vista
Windows
procedures in this section.
2.5.1 Graphics Card Setup
2.5.1.1 Installing Two SLI
Step 1.
Step2.
Downloaded from www.Manualslib.com
TM TM
and Quad SLI
®
NVIDIA SLI
TM TM
/ Vista 64-bit / 7 / 7 64-bit OS. NVIDIA
® TM TM
Vista / Vista 64-bit / 7 / 7 64-bit OS only.
Requirements
TM
1. For SLI technology, you should have two identical SLI
graphics cards that are NVIDIA
gy, you should have two identical Quad SLI
that are NVIDIA
2. Make sure that your graphics card driver supports NVIDIA
technology. Download the driver from NVIDIA
(www.nvidia.com).
3. Make sure that your power supply unit (PSU) can provide at least
the minimum power required by your system. It is recommended
to use NVIDIA
details.
Install the identical SLI
because different types of graphics cards will not work together properly.
(Even the GPU chips version should be the same.) Insert one graphics
card into the PCIE2 slot and the other graphics card to the PCIE3 slot.
Make sure that the cards are properly seated on the slots.
If required, connect the auxiliary power source to the PCI Express
graphics cards.
ASRock 990FX Extreme3 Motherboard
manuals search engine
Operation Guide
® TM
SLI and Quad SLI
TM
technology supports Windows
®
Quad SLI
Please follow the installation
® certified. For Quad SLI
®
certified.
®
certified PSU. Please refer to NVIDIA
TM
-Ready Graphics Cards
TM
-ready graphics cards that are NVIDIA
TM
(Scalable Link Interface)
®
XP / XP 64-bit /
TM
technology supports
TM
-ready
TM technolo-
TM
-ready graphics cards
® TM
SLI
®
website
®
website for
®
certified
17