Preface - ZF 6008.208.450 Betriebsanleitung

Preface

This documentation was developed for skilled personnel who were trained by ZF Friedrichshafen AG to perform maintenance and
repair work on ZF products.
This manual deals with a ZF volume production product in accordance with the state of development on the date of issue.
As a result of technical further developments, the present software may require other work steps as well as different settings and
test data. We therefore recommend that work done on your ZF product is carried out only by skilled mechanics and fitters who
have had their practical and theoretical knowledge updated on a regular basis at our Service Training Center.
The service locations which have been put in place for you worldwide by ZF Friedrichshafen AG offer you the following:
1. Well-trained personnel
2. Specified equipment, e.g., special tools
3. Genuine ZF spare parts in accordance with the latest volume production specifications
All work performed at these service locations is carried out conscientiously and with care.
Warranty:
The repair works performed by ZF Service Centers are regulated within the context of the respectively applicable agreement
provisions. Damages due to improper and unprofessional work performed by non-ZF personnel and any consequential costs
resulting therefrom are excluded from this contractual liability. This also applies if replacement parts other than genuine spare
parts are used.
ZF Friedrichshafen AG
D-88038 Friedrichshafen
Phone: +49/ (0) 7541 / 77-0
Fax: +49/ (0) 7541 / 77-908000
Internet: www.zf.com
5
EN 6008.758.104e - 2015-12